Can I mirror text so that it remains readable (not backwards) in AutoCAD?
Short Answer
Yes — in AutoCAD, you can mirror text so it stays readable by using the MIRROR command with the system variable mirrtext set to 0. This is the most common professional method because it mirrors the object placement while keeping text orientation legible. Limitation: this only works correctly if MIRRTEXT is set before mirroring.
What You Need to Know Before
Warning: If MIRRTEXT is set to 1, mirrored text and attributes will display backwards after the mirror operation. This is a common failure in production drawings, especially when reusing old templates or copied standards files with incorrect system variable settings.
How to Mirror Text So It Remains Readable in AutoCAD
Command: MIRROR
Shortcut: MI
Quick Steps:
- Type
MIRRTEXTin the command line, press Enter, and set it to0. - On the Home tab > Modify panel, click Mirror (or type
MI), then select the text or text-containing objects and press Enter. - Pick the two points of the mirror line, then confirm the result; keep the text readable while the geometry is mirrored.
- Type
Variables & Settings
System Variable: MIRRTEXT (Default: 1)
Expert Setting: When
MIRRTEXT=0, AutoCAD mirrors the text location but preserves readable text orientation. WhenMIRRTEXT=1, the text itself is reversed as mirrored geometry, which is usually only useful for specialty engraving, stamping, or reflected fabrication layouts.
Why it Fails
Cause 1 (Geometry): The mirror line is placed incorrectly, so the text ends up in the wrong position even though it remains readable.
Cause 2 (layers/Locks): The text is on a locked layer, preventing the mirror operation or causing only part of the selected objects to mirror.
Cause 3 (Command/Logic):
MIRRTEXTis set to1, so the MIRROR command flips the text characters backwards instead of preserving readability.
Quick Fix & Best Practice
- Quick Fix: Type
MIRRTEXT, set it to0, then runMIRRORagain on the text. - Manager’s Verdict: Use
MIRRTEXT=0as the office standard for architectural, mechanical, and documentation drawings. Only allow reversed text when a fabrication or signage workflow specifically requires it.
FAQ
Does MIRRTEXT affect Mtext and single-line text?
Yes, it affects both text objects during mirroring.
Can I fix backwards text after mirroring?
Yes, set MIRRTEXT to 0 and mirror the text again, or recreate it if needed.
Does this also affect block attributes?
Yes, attributes can also appear backwards if MIRRTEXT is set incorrectly.
.
